Fronius Primo 3.6-1 Solar inverter 4.210.067
successor of Fronius IG Plus 35V-1 Solar inverter

With performance classes from 3.0 to 8.2 kW, the Fronius Primo The new Snapinverter inverter generation perfectly. The single -phase, transformer device is the ideal inverter for private households.

The Fronius Primo is not certified for the low-voltage guideline (VDE-Ar-n 4105) in Germany, but according to VDE-0126-1-1. The use of the Fronius Primo It is therefore not possible in new facilities in Germany

The Fronius Primo is only recommended in Germany as a inverter for repowering PV systems. However, the use must always be coordinated with the network operator


Technical data:
 

Input data	Fronius Primo 3.6-1
Max. (IDC Max1 / IDC Max2)	12.0 A / 12.0 a
Max. Short -circuit current module field (MPP1 / Mpp2)	18.0 a / 18.0 a
Min. Input voltage (UDC Min)	80 V
Feeding starting voltage (UDC Start)	80 V
Nominal input voltage (udc, r)	710 V
Max. Input voltage (UDC Max)	1,000 V
MPP voltage area (Umpp min - umpp max)	200 - 800 V
Number of MPP trackers	2
Number of DC connections	2 + 2
Output data
AC-nation (PAC, R)	3,680 W
Max. Output power	3,680 VA
Max. Starting current (IAC Max)	16.0 a
Network connection (voltage range)	1 ~ NPE 220 V / 230 V (180 V - 270 V)
Frequency (frequency range)	50 Hz / 60 Hz (45 - 65 Hz)
Clip factor	< 5 %
Power factor (COS φAC, R)	0.85 - 1 ind. / cap.
GENERAL DATA
Dimensions (Height x width x depth)	645 x 431 x 204 mm
Weight	21.5 kg
Type of protection	IP 65
Protection class	1
Surge category (DC / AC)1)	2 / 3
Night consumption	<1 W
Inverter concept	Transformer
cooling	Regulated air cooling
Assembly	Interior and external assembly
Ambient temperature range	-40 ° C- +55 ° C
Permissible humidity	0 % - 100 %
Max. Height above sea level	4,000 m
Connection technology DC	2x DC+1, 2x DC+2 and 4x DC screw terminals 2.5 - 16 mm²
Connection technology AC	3 pole AC screw terminals 2.5 - 16 mm²
Certificates and fulfillment	DIN V VDE 0126-1-1/A1, IEC 62109-1/-2, IEC 62116, IEC 61727, AS 4777-2, AS 4777-3, G83/2, G59/3, CEI 0- 21, VDE AR ​​N 4105
Efficiency
Max. Efficiency	97,7 %
Europ. Effect (ηeu)	96,8 %
η at 5 % PAC, R2)	80,8 / 82,5 / 82,5  %
η at 10 % PAC, R2)	86,3 / 93,6 / 91,8 %
η at 20 % PAC, R2)	91,6 / 96,2 / 95,2 %
η at 25 % PAC, R2)	92,7 / 96,9 / 95,8 %
η at 30 % PAC, R2)	93,5 / 97,2 / 96,3 %
η at 50 % PAC, R2)	95,0 / 97,7 / 97,3 %
η at 75 % PAC, R2)	95,6 / 97,8 / 97,8 %
η at 100 % PAC, R2)	95,8 / 98,0 / 97,8 %
MPP adaptation efficiency	> 99,9 %
SAFETY DEVICES
DC isolation measurement	Yes
Overload behavior	Deployment point shift, performance limitation
DC separator	Yes
Interfaces
WLAN / Ethernet LAN	Fronius Solar.web, modbus tcp sunspec, Fronius Solar Api (JSON)
6 inputs or 4 digital inputs/outputs	Connection to rod tax receivers
USB (type A socket)	Data logging, inverter update via USB stick
2 x RS422 (RJ45 socket)	Fronius Solar net
Registration output	Energy management (potential -free relay output)
Datalogger and web server	Integrated
External entrance	Connection S0 counter / evaluation overvoltage protection
RS485	Modbus RTU Sunspec or meter connection

¹⁾ According to IEC 62109-1.
²⁾ And at U_{mpp min} / U_{dc, r} / U_{mpp max}

The guarantee conditions can be found under the Downloads tab

If you do not register your new inverter online, the minimum guarantee of 2 years applies.

The new guarantee is activated by a short registration www.solarweb.com

Instructions guaranteed registration ...

5 years Fronius guarantee Plus (Material guarantee + service flat rate + transport flat rate)

Downloads

Manufacturer guarantee:
Herstellergarantiebedingungen_FRONIUS.pdf


Data blat

Data sheet...

Downloads

Herstellergarantiebedingungen_FRONIUS.pdf